Harman JBL PARTYBOX 1000 - Powering On and Bluetooth Connection Guide; How to Power On the JBL PartyBox 1000; Bluetooth Pairing and Device Connection

10
5. POWER ON
Caution:
– Use the provided power cord only.
Plug one end of the power cord into the POWER connector on
the back of the speaker, then plug the other end to a live AC
(mains) outlet.
6. USING YOUR PARTYBOX
6.1 Bluetooth connection
You can use your PartyBox as an external speaker for your
Bluetooth enabled smartphone or tablet.
1) Press to enter Bluetooth pairing mode.
2) Select “JBL PartyBox 1000” to connect.
3) Once successfully connected, audio will stream from your
Bluetooth device to this speaker.
10m (33ft)
2
DEVICES
JBL PartyBox 1000
Bluetooth
Bluetooth
1
Notes:
– This speaker can memorize a maximum of 8 paired devices. The
ninth paired device will replace the rst one.
– Bluetooth performance can be affected by the distance between
this product and your Bluetooth device and the environment of
operation.
To terminate the Bluetooth-enabled device:
• Turn off this speaker;
• Disable Bluetooth on your device; or
• Move this speaker beyond the Bluetooth operational range.
To reconnect the Bluetooth-enabled device:
• When you turn on this speaker next time, it tries to reconnect
the last connected device automatically;
• If not, manually select “JBL PartyBox 1000” on your Bluetooth
device to start a connection.