Harman JBL PARTYBOX 1000 - Back Panel; 4 Placement

9
www.jbl.com
English
3.3 Back panel
2
3
1
4
5
6
7
8
9
1) USB
• Connect to a USB storage device.
• Charge an external USB device.
2) AUX
• Connect an external audio device with an audio cable.
3) LINE OUT
• Connect to the analog audio input jacks of another analog
device with RCA audio cable.
4) LINE IN
• Connect to the analog audio output jacks of an analog
device with RCA audio cable.
5) GUITAR
• Connect to a guitar (not provided).
6) MIC
• Connect to a microphone (not provided).
7) VOLUME (MIC)
• Rotate the knob to adjust the mic volume to your desire
loudness level.
8) VOLUME (GUITAR)
• Rotate the knob to adjust the guitar volume to your desire
loudness level.
9) GAIN
• Guitar and microphone gain control buttons to match
different sensitivity.
4. PLACEMENT
Place the speaker vertically on a at, stable surface and make
sure that the rubber feet side is down.
Note:
– Do not sit on the speaker or push it. Otherwise, it may result in
malfunction and cause personal injury.