14
10. SPECIFICATIONS
• AC power input: 100-240V ~ 50/60Hz
• Power consumption: 150W
• Sta ndby power consumption:
<2W with BT connecting;
<0.5W without BT connecting
• USB output: 5V 2.1A
• Speaker drivers: 1 x12” Subwoofer + 2 x 7” Mid-range +
1 x Compression driver
• Speaker impedance: Subwoofer 3 ohm / Midrange 4 ohm /
Compression driver 4 ohm
• Rated output power: 550 W RMS
• Total output power: (IEC 60268) 1100 W RMS
• Frequency response: 30Hz -20kHz(-6dB)
• Signal-to-noise (S/N) ratio: 80 dBA
• Wristband battery usage time: 10h
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.3, AVRCP V1.6
• Bluetooth transmitter frequency range: 2402-2480 MHz
• Bluetooth maximum transmitter power: 15dBm (EIRP)
• Bluetooth transmitter modulation: GFSK, π/4 DQPSK,
8DPSK
• Bluetooth range: Approx. 10m (33 feet)
• USB le system: FAT16, FAT32
• USB le format: .mp3, .wma, .wav
• Air gesture wristband: BLE technology
• Dimensions (W x H x D): 397 x 1050 x 390 mm /
15.6 x 41.3 x 15.4 in
• Net weight: 34.7 kg / 76.5 lbs
There are two ways to exit the standby mode:
1. Press (power) the speaker will enter normal mode.
2. If the speaker is connected to Bluetooth, press the play
button on your device.
9.4 Factory reset
To restore the factory settings, press and hold and for more
than 10 seconds.
To Next Page
Loading...
