4.3: INPUT CHANNEL > DYNAMICS
Vi3000 USER MANUAL
4.3 INPUT CHANNEL > De Esser
Vi3000 USER MANUAL
4.1 4.1: Hardware > Local I/O
4.1: Hardware > Local I/O
PSU / Power
Sockets
There are two mains
inputs for seamless re-
dundancy for those that
require it. The IEC inlets
can accept AC inputs
from 100V to 240V.
Either socket can be used for a single supply. if both are
used then one is a backup. The two sockets are labelled
PSU1 and PSU2, corresponding to indicator lights on the
Menu-System-Local page. The colour of this indicator,
and the power button on front panel of the console, indi-
cates the state of these PSUs: RED if only one of them
is on, and GREEN if both are on.
Power
Switches Inactive Active
There is a power switch
for each of the power
supply inputs. Both
need to be on for the
dual redundancy switch-
ing to be effective.
Power off Power on
DVI (Digital
Video) output
For future use.
MIDI In / Out
5-Pin DIN connectors
for MIDI compatible
equipment only.
USB
The console USB con-
nections ca be used for
connecting an external
keyboard or for USB
storage devices.
HiQnet
Interface
XLR-housed EtherCon
connector for HiQnet
network connection.
For details on HiQnet setup, please refer to reference
chapter 18.
To Next Page
Loading...
Need help?
General
