Harris DataSmart 763 - Page 35

35
The second step is to select System Priority:
 LEFT BANK
 RIGHT BANK
 FIRST IN FIRST OUT (FIFO)
When the user selects a bank (Left or Right), they will automatically be taken into the corresponding screen to configure.
Upon pressing DONE they will then be taken to the opposite bank screen to configure. Upon pressing DONE they will be
returned to the main configuration screen. If the user selects FIFO, the user will automatically be taken to the Left Bank
to configure. Upon pressing DONE they will then be taken to the Right Bank screen to configure.
In the following scenario the user selects LEFT BANK as Primary. The first step is to select the gas source:
Available Gas Sources:
 Pressure Cylinder
 Cylinder Bank
 Liquid Dewar
 Bulk System
Gas Type is dependent on Gas Source selection.
Pressure Cylinder and Cylinder Bank:
 Nitrogen
 Helium
 Hydrogen
 Oxygen
 Carbon Dioxide
 Argon
 Air
 Propane