Harris Platinum Series - Page 42

User Display Edit - This screen is displayed when the USER
DISPLAY EDIT key is selected on the USER SETUP SELEC-
TION MENU screen. This screen is used to select the 4 data
values to be displayed on the Bargraph screen.
Any 4 values can be selected for display on the Bargraph Meter
screen.
There are 5 active softkeys on this screen. They are:
DOWN - This key moves the cursor downward through the list
of displayable values.
UP - This key moves the cursor upward through the list of
displayable values.
SWAP - This key swaps the value to be displayed with the value
that is currently being displayed.
NEXT - This key cycles the user through the 4 displayable items
currently being displayed.
EXIT - This key will return the user to the User Setup Menu.
USER DISPLAY EDIT ALARM
(2) Visual Reflected Power
1 Visual Power
- Visual VSWR
3 Aural Power
4 Aural VSWR
>2 Visual Reflected Power
- Aural Reflected Power
- Visual Driver A Power
- Aural Chain A Power
DOWN UP SWAP NEXT EXIT
Figure 3-13. User Display Edit
D/A OUTPUT EDIT
(1) Visual Power
>1 Visual Power
2 Visual VSWR
3 Aural Power
4AuralVSWR
- Visual Reflected Power
- Aural Reflected Power
- Visual Drive A Power
- Aural Chain A Power
DOWN UP SWAP NEXT EXIT
Figure 3-14. D/A Output Edit
D/A Output Edit - This screen is displayed when the USER
DISPLAY EDIT key is selected on the USER SETUP SELEC-
TION MENU screen. This screen is used to select the 1-4 remote
analog sources.
NOTE
The 4 values selected appear as the first 4 remote analog samples.
A change of selection will send new data to the remote.
There are 5 active softkeys on this screen. They are:
DOWN - This key moves the cursor downward through the list
of displayable values.
UP - This key moves the cursor upward through the list of
displayable values.
SWAP - This key swaps the value to be displayed with the value
that is currently being displayed.
NEXT - This key cycles the user through the 4 displayable items
currently being displayed.
EXIT - This key will return the user to the User Setup Menu.
Items now shown as 1-4 on the screen are the default selections.
3-10 888-2365-001 Rev. B: 1/11/1999
WARNING: Disconnect primary power prior to servicing.