9/15/06 888-2586-001 2-27
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation & Initial Turn-On
Platinum Z16HD+
placed in the same positions as during factory testing. The module serial number
tag should be on top of the module when inserted into the transmitter.
!
CAUTION:
EACH MODULE HAS TWO CAPTIVE THUMBSCREWS WHICH MUST BE
TIGHTENED TO ASSURE PROPER MODULE OPERATION. THEY SHOULD BE
FINGER TIGHT. IF A SMALL SCREWDRIVER IS USED, BE SURE NOT TO
OVERTIGHTEN.
Figure 2-9 PA Compartment Front View
D1
C1
IPA_CD1
IPA_CD2
B1
A1
C2
D2
D3
C3
D4
C4
B2
A2
B3
A3
B4
A4
IPA
AB2
IPA_AB1
To Next Page
Loading...
