3-6 888-2586-001 9/15/06
WARNING: Disconnect primary power prior to servicing.
Platinum Z16HD+Section 3 Operator Guide
Figure 3-5 Status Layer 2, Page 1
3.4.3 MORE
MORE is a menu item which is used when there are more menu items on a layer than
will fit on one screen. It will take you to the next screen in the same layer. When you
have reached the last screen in that layer, pressing MORE again will take you back to
the first screen in that layer. This is shown on the Diagnostics Display Menu Tree
drawings.
3.4.4 Diagnostic Codes
For ease of discussion a simple code will be used to guide you to the area or screen
being discussed. The code will have the name of one of the HOME menu items listed
above, followed by the appropriate A, B, C or D function key presses required to get to
the screen being discussed. The code will always be enclosed in brackets [x,x,x].
NOTE:
It will be assumed that you always press the HOME key first before entering the
key sequences in the brackets.
Example 1
If you wanted to check the temperature of the individual Power Amplifiers on Z Plane
A, you would press the following keys:
[METERING, D, B, C]
After entering this key sequence the screen should look like Figure 3-6. This is
equivalent to pressing the following menu items as they appear on each successive
screen: METERING, TEMPERATURE, PA, Z PLANE A.
To Next Page
Loading...
