Revision C.1 • 12/10
HARRIS CORPORATION
5-2
5 Service
SPARE AND REPLACEMENT PARTS
Serviceable Assemblies
These are the serviceable or replaceable panels,
cards, assemblies or PCAs used in the RMX
digital
:
Harris # Description or Use
90-1950 Original Console Display (tall display)
95-1178 Clock PCA
95-1179 Event Timer PCA
99-1177 Bargraph Meter PCA
95-2670-1 Left motherboard PCA (for DSP)
95-2670-2 Middle motherboard PCA (for DSP)
95-2679 Right motherboard PCA (for KSU)
99-1205 48 Volt Power Supply (2 RU)
99-1406 Monitor Control Panel
99-1407 Universal Dual Fader Panel
99-1975-1 Reflective Console Display (low-profile)
90-2129 Dual Meter PCA
90-2130 Clock-Timer PCA
99-2665 8-Input Expansion Card
95-2665 8-Input Expansion PCA
99-2667 DSP Card
95-2667 DSP PCA
99-2672-1 KSU Card (no optical connectors)
95-2672-1 KSU, main PCA
95-2675 KSU, analog connector PCA
95-2677 KSU, digital connector PCA
99-1800 Single-board computer PCA
99-2672-2 KSU Card (with optical connectors)
95-2672-2 KSU, main PCA
95-2675 KSU, analog connector PCA
95-2677 KSU, digital connector PCA
99-1800 Single-board computer PCA
Replaceable Parts
These are the field-replaceable parts:
Harris # Description or Use
12-93 10-character display
17-122 Headphone jack
19-327 Flex cable, 30-conductor (KSU card)
19-335 18" Red CAT-5 cable (panel power & comm)
19-336 36" Black CAT-5 cable (motherboard jumper)
21-226-6 PROM, Monitor Control panel
21-226-7 PROM, Universal Dual Fader panel
21-349-1 PROM, DSP card
21-352-1 DSP PROM, KSU card (U55)
21-352-2 Net PROM, KSU card (U60)
21-353-1 PROM, 8-Input Expansion card
30-51 Battery holder
23-132 Cue speaker
32-725 Rotary control knob
32-726 Fader knob (silver)
32-727 Fader knob (red)
32-728 Fader knob (green)
32-729 Fader knob (blue)
32-730 Fader knob (yellow)
Harris # Description or Use
38-88 Silver hex panel screw
50-26 5 Volt power supply (for Console Display)
76-1403 Monitor Control panel, removable lens kit
76-1404 Universal Dual Fader panel, removable lens kit
80-1752 Lens (covers 10-character display and LEDs)
80-1846 Card cage slot blank panel
80-1924 Rear cover, Universal Dual Fader panel
80-1929 Rear cover, Monitor Control panel
80-1961 Insert Sheet (for printing removable lens labels)
80-1975-1 Reflector (for low-profile display)
90-1858-1 15-foot DC cable (power supply to console)
90-1873 Cue Speaker assy (23-132 speaker and cable)
90-1713-2 Fader and cable assy
90-1722 Battery holder assy (30-51 holder and cable)
90-1872-1 RMXd-4 H/P jack assy (17-122 jack and cable)
90-1872-2 RMXd-12 H/P jack assy (17-122 jack and cable)
90-1872-3 RMXd-20 H/P jack assy (17-122 jack and cable)
90-1872-4 RMXd-28 H/P jack assy (17-122 jack and cable)
90-1999 Cable Harness (for low-profile display)
99-1411-1 One slot wide divider kit (to add two turret panels)
99-1411-2 Two slots wide divider kit (to add four turret panels)
99-1409 14.25" blank panel, one slot wide
99-1410 14.25" blank panel, two slots wide
99-1714-3 6" Turret blank panel, one slot wide
TOOL AND INSTALLATION KITS
A tool kit and an installation kit are shipped
with each new console.
76-1400 Installation Kit
Harris # Description or Use Qty.
14-482 3-pin AMP MOD IV housing 13
14-484 6-pin AMP MOD IV housing 21
14-490 12-pin AMP MOD IV housing 4
14-492 14-pin AMP MOD IV housing 2
15-938-1 AMP MOD IV contact receptacles 241
38-88 4-40 x 1/4" buttonhead screws 12
76-1403 Lens Kit, Monitor Control panel 1
76-1404 Lens Kit, Universal Dual Fader panels *
80-1961 Insert Sheet, for removable lenses 1
* one per installed panel
76-1401 Tool Kit
Harris # Description or Use Qty.
50-7 AA NiCad batteries 3
70-90 Hex/Allen screwdriver 1
70-126 AMP MOD IV crimp tool 1
70-129 AMP MOD IV pin extractor tool 1
76-2665 8-Input Expansion Card Kit
Harris # Description or Use Qty.
14-482 3-pin AMP MOD IV housing 8
14-484 6-pin AMP MOD IV housing 8
14-490 12-pin AMP MOD IV housing 8
15-938-1 AMP MOD IV contact receptacles 144
38-88 4-40 x 1/4" buttonhead screws 12
To Next Page
Loading...
