12/20/11 888-2595-001 5-35
WARNING: Disconnect primary power prior to servicing.
Section 5 Maintenance and Alignments
ZX Series
Consult Figure 5-4 and Figure 5-5 to become familiar with the major parts of the output
assembly.
Figure 5-4 Output assembly
[002]
[003]
[004]
[005]
[006]
[001]
[001] Directional couplers for forward, reverse
metering, customer RF monitor sample.
[002] 20-pin ribbon cable connection to 16X
load board.
[003] Thumbscrew to secure assembly to trans-
mitter chassis (4 places).
[004] Heatsink base with ballast loads.
[005] Combiner with harmonic filter.
[006] EIA 1-5/8 flangeless RF output.
To Next Page
Loading...
