12/20/11 888-2595-001 2-1
WARNING: Disconnect primary power prior to servicing.
ZX Series
Section 2
Installation
2
This section contains information concerning the installation and commissioning of ZX
series transmitters.
2.1 Field Services
Some Harris customers choose to install their transmitter themselves, while others
prefer to have their transmitter installed and/or commissioned by Harris or a Harris-
provided contractor in their region. Contact your Harris sales representative for more
information on obtaining Harris field service assistance.
Harris offers the following field service options:
2.1.1 Installation
Service engineers perform complete on-site installation of your transmitter. When
ordering installation, you will need to provide Harris with detailed information about
your facility, such as:
• Information about any remote control system to be installed.
• Information about the availability of a reserve transmitter and any scheduling
restrictions (e.g. can only be off-air early morning hours).
• A list of equipment and tools already available on-site.
• Any mechanical layout drawings showing the location of all existing
equipment.
To Next Page
Loading...
