HART HTMS01 - Symbols; Signal Words and Meanings; Product Symbols and Explanations

6 – English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicatesahazardoussituation,which,ifnotavoided,willresultindeathorseriousinjury.
WARNING:
Indicatesahazardoussituation,which,ifnotavoided,couldresultindeathorserious
injury.
CAUTION:
Indicatesahazardoussituation,that,ifnotavoided,mayresultinminorormoderate
injury.
NOTICE:
(WithoutSafetyAlertSymbol)Indicates information consideredimportant,but not
relatedtoapotentialinjury(e.g.messagesrelatingtopropertydamage).
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert
Indicatesapotentialpersonalinjuryhazard.
Read Operator’s Manual
Toreducetheriskofinjury,usermustreadandunderstandoperator’s
manualbeforeusingthisproduct.
Eye Protection
Alwaysweareyeprotectionwithsideshieldsmarkedtocomplywith
ANSIZ87.1.
No Hands Symbol
Failureto keep your hands awayfrom the blade willresult in
seriouspersonalinjury.
Wet Conditions Alert
Donotexposetorainoruseindamplocations.
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency(cyclespersecond)
min
Minutes
Time
Alternating Current
Typeofcurrent
n
o
No Load Speed
Rotationalspeed,atnoload
Class II Construction
Double-insulated construction
.../min
Per Minute
Revolutions,strokes,surfacespeed,orbits,etc.,perminute