Hartmann DC3-18 - Applying the Cuff

21
English
EN
8. Record all measured values with the date, time and
medications taken, conveniently and easily with
Veroval
®
medi.connect.
9. Take measurements regularly. Even if your values have
improved, you should continue to check them for
monitoring purposes.
10. Always take measurements at the same time of day. As a
person has about 100,000different blood pressure values
over the course of a day, individual measurements have no
significance. Only regular measurements taken at the same
time each day over a longer period of time enable the blood
pressure values to be assessed meaningfully.
5.2 Applying the cuff
 Before applying the cuff, insert the cuff´s plug into the connector socket on
the left side of the monitor.
 Do not mechanically constrict, compress or bend the cuff tube.
 The blood pressure must be measured on a bare upper arm. If the cuff is
completely open, thread the end of the cuff through the metal ring to form a
loop. The hook-and-loop fastener must face outwards. Hold the cuff by the
grip tab A (see Fig.1) and pull it up over your upper arm.
Fig.1
A
B
Fig.2
IFU_Veroval_dc_SK6_0307662_2020-02-10.indd 21 27.02.20 13:08