EasyManuals Logo

Hasselblad 503CX Instruction Manual

Hasselblad 503CX
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Viewfinder System
Changing the Viewfinder
The film magazine or rear cover must
be
de-
tached before the focusing hood or other viewfin-
der can be removed. The focusing hood should
be folded down before being removed, to prevent
it from being damaged.
Remove the hood
by
sliding it to the rear
in
its
guide slots.
Slide the replacement finder into the slots and
push it forward.
Attach a magazine or rear cover
to
the camera.
Changing the Magnifier
The focusing hood has
an
easily interchange-
able magnifier that allows you to match the
viewfinder with your eyesight.
Lenses with diopter correction from +3 to
-4
are
available, and are easily interchanged as fol-
lows:
Remove the focusing hood from the camera and
open it
by
lifting the lid firmly
at
the rear edge.
Bring the magnifier to the viewing position by
moving the oval button
in
the direction of the
arrow.
Push the magnifier half way back down to its
folded position.
Grip the lower edge of the magnifier between
thumb and forefinger (through the underside of
the hood), and pull firmly.
Insertion
of
the replacement lens
is
the reverse of
the above procedure.
21

Other manuals for Hasselblad 503CX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hasselblad 503CX and is the answer not in the manual?

Hasselblad 503CX Specifications

General IconGeneral
Camera TypeMedium format SLR
Image Size6x6 cm
FocusManual
Film Format120/220
Lens MountHasselblad V-system
Shutter Speed1/500 sec to 1 sec, Bulb
ViewfinderInterchangeable waist-level or prism
Shutter TypeFocal-plane shutter

Related product manuals