Magazine and Camera Indicators
The indicators on the right hand side of the camera
and magazine show if the particular unit is ready to
operate (white) or if it has been operated (red). The
golden rule is, that when you attach a magazine to a
camera, the indicator colours should match - white to
white, or red to red. There are only two correct combi-
nations. This is how you rematch the indicators.
White magazine - Red Camera
Remove the magazine from the camera.
Wind the camera with one full turn of the winding
crank. The camera indicator will change to white.
Replace the magazine. Both indicators will now dis-
play white.
Red Magazine - White Camera
Remove the magazine from the camera.
Operate the camera - its indicator will change to red.
Attach the magazine.
Wind the camera with one full turn of the winding
crank.
Both indicators will now display white.
To Next Page
Loading...
