Form No. TQ2M_CN-0519
13
English
OPTIONS AND ACCESSORIES
Security Cover
The lockable security cover flips up and down to limit access
to the control panel.
1. Remove the crumb tray.
2. Remove the two front screws on the platform above the
controls.
3. Position the security cover over the control panel, aligning
the mounting holes on the security cover with the screw
holes on the platform.
4. Reinstall the two screws through the security cover and
into the platform. Tighten securely.
5. Reinstall the crumb tray.
Extended Feed Guide
The extended feed guide accessory adds 76 mm (3″) to the
feed ramp.
Automatic Power Save Mode
The optional automatic power Save mode feature switches to
power save mode after 30 minutes of inactivity (not available
for TQ-10 models).
Security
Cover
Platform
Lockable security cover
flips up and down.
Platform
Screw
Security Cover