18
5. Environmental protection
Disposing of packaging:
Packaging elements (cardboard, plastic, etc.) are classified as solid waste suitable for
recycling. Before disposing of the packaging, please check the local regulations for the material in
question.
Device scrapping:
The product consists of many types of different materials. Most of the materials used (aluminum,
plastic, steel, tubing, etc.) can be disposed of in normal recycling bins. Other materials (control units,
remote control batteries, etc.) may contain harmful substances and should be returned to
specialized companies for disposal.
6. Maintenance
In order to ensure the greatest possible safety measures and to extend the service life of all
components of the set, the user should perform maintenance on the drive once a month.
These are the maintenance operations while the power is off:
• disconnect the drive from the power supply
• check the condition of the garage door and the chain, especially in terms of stability
• metal, moving parts of the drive should be regularly lubricated to prevent their rusting and
to ensure failure-free operation of the device.
• clean the photocell housings with a damp cloth. Do not use solvents or any other chemical
products that may damage the device
• before changing the bulb, the device should be disconnected from the power source
• If the chain squeaks, lubricate it with chain oil
• maintenance activities must always be carried out according to the manufacturer's
recommendations
To Next Page
Loading...
