Hatz 2M41 - Fuel

2L41C, 2M41, 2M41Z Technical data
HATZ
23Operator’s Manual
9 “variable speed" or "constant speed only" (if necessary)
The type plate also defines the applicable emissions-related performance
class of the engine.
The figure shows an EPA/CARB type plate.
A text that refers to the exhaust legislation and corresponds to the engine
type is printed on the type plate (EPA or EPA and CARB).
Every engine is equipped with an additional unattached type plate. When the
engine is built into a machine and the original type plate is not readily visible,
the second unattached type plate must be affixed to the application in a posi-
tion that is clearly visible for an average person.
The following data must always be specified for requests and spare part or-
ders
2 Engine type/specification (only for special equipment)
3 Engine serial number
4 Max. engine speed (rpm)
Always install the engine appropriate for the intended application to fulfill the
EPA and CARB exhaust requirements.
4.3 Fuel
Fuel type
All types of diesel fuel that meet the minimum requirements of the following
specifications are suitable:
▪ EN 590 or
▪ BS 2869 A1 / A2 or
▪ ASTM D 975- 1D / 2D
CAUTION
Danger of engine damage from low quality fuel.
The use of fuel that does not meet the specifications can lead to
engine damage.
▪ Only use fuel that is very low in sulfur or that contains no
sulfur at all.
▪ The use of fuel that does not meet specifications requires
approval by Motorenfabrik HATZ (main plant).