Hatz 2M41 - Starting the Engine with a Starter

2L41C, 2M41, 2M41Z Operation and use
HATZ
41Operator’s Manual
Step Activity
2 Grasp the handle bar (1) with both hands.
3 Slowly turn the crankhandle until the drive dog (3) engages.
4 Turn the crankhandle forcefully with increasing speed. When the
decompression lever engages in the "0" position (compression),
the highest possible speed must be reached.
5 As soon as the engine starts, pull the crankhandle out of the
guide sleeve(4).
7.5.2 Starting the engine with a starter
Standard model
Pos. Designation
1 Operating display
2 Charge control
3 Oil pressure display
4 Engine temperature display (option)
5 Air filter maintenance display
6 Pre glow display (option)
Ignition lock
0 Off
I Operation
II Starting