Hatz 2M41 - Maintenance Plan; Checking the Intake Area of the Combustion Air; Checking the Cooling Air Area

2L41C, 2M41, 2M41Z Maintenance
HATZ
53Operator’s Manual
2L41C
max
OIL
8.2.2 Maintenance plan
The degree of contamination of the fuel, the care with which refueling is per-
formed and the soiling on the inside of the fuel tank are decisive in determin-
ing the change interval of the fuel prefilter and the fuel filter.
Symbol Maintenance in-
terval
Maintenance activity/check Chapter
Every 8-15 oper-
ating hours or ev-
ery day before
starting
Check the oil level. 7.8 Checking the
oil level and
adding oil if nec-
essary, page 47
Check the intake area of the
combustion air.
8.2.3 Checking
the intake area of
the combustion
air, page 55
Check the cooling air area. 8.2.4 Checking
the cooling air
area, page 58
Visual check of the condition
of the crankhandle (handle
bar, crank arm, drive dog)
If necessary, lightly grease
gliding area between
crankhandle and guide sleeve.
−