Hatz 2M41 - 8.2.2 Maintenance plan

Maintenance 2L41C, 2M41, 2M41Z
54
HATZ
Operator’s Manual
Symbol Maintenance in-
terval
Maintenance activity/check Chapter
250h
Every 250 operat-
ing hours
Change the engine oil (2M41
and 2M41Z withoutoil sump,
2L41C in general).
8.2.5 Change the
engine oil, page
59
Clean the cooling fan, cooling
fins and oil cooler.
8.2.6 Cleaning
the cooling fan,
cooling fins and
oil cooler, page
61
Check the screw connections. 8.2.7 Checking
the screw con-
nections, page
64
Clean the screen insert in the
exhaust pipe.
8.2.8 Cleaning
the screen insert
in the exhaust
pipe (additional
equipment), page
64
Check the fuel prefilter for
contamination and change it if
necessary.
8.2.9 Changing
the fuel prefilter,
page 66
Check the air filter mainte-
nance indicator.
8.2.15 Checking
that the air filter
maintenance indi-
cator is working
properly, page
78
500h
Every 500 operat-
ing hours
Change the fuel prefilter. 8.2.9 Changing
the fuel prefilter,
page 66
Maintain the dry air filter.
Change the filter cartridge.
8.2.10 Maintain-
ing the dry air fil-
ter, page 68
Check and set the tappet
clearance.
8.2.12 Check and
set the tappet
clearance, page
72
Change the engine oil (2M41
and 2M41Z withoil sump).
8.2.5 Change the
engine oil, page
59