Hatz 2M41 - Changing the Oil Filter

2L41C, 2M41, 2M41Z Maintenance
HATZ
75Operator’s Manual
Step Activity
NOTE:
▪ Under no circumstances is the engine permitted to be oper-
ated if not all covers are mounted.
6 After a brief trial run, check the cylinder head cover for tight-
ness.
8.2.13 Changing the oil filter
Safety note
CAUTION
Danger of burns.
When working on the engine there is a danger of burns from hot
oil.
▪ Wear personal protective equipment (gloves).
▪ Collect the used oil and dispose of it according to local envi-
ronmental regulations.
Overview
Procedure
Step Activity
1 Release the oil filter with a strap wrench and quickly unscrew
and remove it.
▪ HATZ order no. for strap wrench: 620 307 01.
2 Dispose of the old filter in accordance with local environmental
regulations.
3 Wipe spilled engine oil out of the oil baffle.
4 Lightly oil the sealing lip of the new oil filter.
5 Screw in the oil filter and tighten it by hand.