Important:
When installing a new filter, note the arrow indi-
cating the correct flow direction (depends on
whether the tank is mounted HIGH or LOW.
The filter’s installed position (direction of flow)
should be as vertical as possible.
– Open the fuel supply line.
– Check fuel filter and lines for leakage after a
short test run.
Note:
If starting appears difficult, bleed the injection
system (Chapter 4.1.3).
5.4.2. Replace the engine oil filter
It makes sense to replace the filter cartridge
simultaneously with the engine oil change.
The engine must be placed horizontally and be
at a standstill.
Danger of scalding from hot oil !
Trap the old oil and dispose of it in
accordance with local legislation.
Horizontal replaceable-cartridge filter
(standard equipment)
41
– Release replaceable-cartridge lubricant filter by
means of a strap wrench or a similar tool, and
remove it.
42
– Clean sealing surface 1 thoroughly.
– Slightly grease the packing ring 2 of the new
replaceable-cartridge filter.
– Turn-in replaceable-cartridge filter and tighten
it by hand.
Vertical replaceable-cartridge filter
(optional equipment)
– Remove air cleaner cover including filter
cartridges. Chapter 5.4.3.
43
– Release replaceable-cartridge lubricant filter by
means of a strap wrench or a similar tool.
Alternately, an appropriate tool can also be
slipped on the hexagon 1.
30
To Next Page
Loading...
