Page 3For technical questions, please call 1-888-866-5797.Item 62837
SAFETYOPERATIONMAINTENANCE ASSEMBLY
b. Maintain the Carrier. Check for misalignment
or binding parts, breakage of parts and
any other condition that may affect
operation. If damaged, have the product
repaired before use. Many accidents are
caused by poorly maintained products.
4. Use the Carrier in accordance with these
instructions, taking into account the working
conditions and the work to be performed. Use of
this equipment for operations different from those
intended could result in a hazardous situation.
Motorcycle Carrier Safety Information
1. Secure motorcycle frame and wheels
securely using ratcheting tie downs
(not included) and included pins.
2. Push, do not drive, the motorcycle onto the Carrier.
3. Obey all DOT regulations pertaining to
mounting the Carrier onto a vehicle.
4. Only use this product with a vehicle that has
a 2″ square receiver hitch, rated to at least
Class III, and can bear the additional weight
of both the Carrier and motorcycle.
5. Do not sit on motorcycle while loading,
unloading, or while supported on carrier.
6. Do not exceed maximum load for this product
(400 lb.). Loading a heavier object on this
product can result in dangerous conditions
to both the operator and the item loaded.
7. Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
8. Keep bystanders out of the area during
assembly, loading and unloading.
9. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Note: A light kit (such as Kenway 64275, sold
separately) must be installed on this hitch-mounted
carrier if your cargo blocks the license plate and/
or tail lights on your vehicle. Please review your
state or local laws regarding tail lights and license
plates for required location and lighting.
SAVE THESE INSTRUCTIONS.
Specifications
Weight Capacity 400 lb
Motorcycle Platform Size 78-3/4" L x 8-5/8" W
Receiver Size 2″
To Next Page
