241 4001055250 E 10.21 USA / GB
Jib
Remove/Re-install jib cylinder
MS0224
Jib
Remove/Re-in stall jib cylinder
1 - Concerned area
2 - Warning
• Only an authorised and qualified technician is permitted to work on the machines HAULOTTE®.
• The use of this form implies that its user has been trained on this type of equipment.
• It is important that the person working on the machine is familiar with all of the safety information contained
in the user manual.
• Generally speaking, the user must comply with regulatory obligations in force, particularly those relating
specifically to working alone, co-activity and manual load handling...
• The user must have all the permits/authorizations required to work (fire permit, etc.) and comply with the
specific safety instructions at the intervention site.
• Only risks linked specifically to activities relating to the disassembly and assembly of the
machine HAULOTTE® are described in this sheet.
• Beware of the risk of burns; the hydraulic system operates at high temperatures.
• The pressure in the hydraulic system is very important. It can cause accidents. Relieve the pressure before
beginning any work and never search for oil leaks using your hands.
• The engine exhaust gases contain harmful combustion products. Always start and run the engine in a well
ventilated area. In a closed room, ensure the exhaust gases are evacuated to the outside.
• Do not wear any metal jewellery (rings, watches, chains, etc.) when working on the batteries.
• ONLY use insulated tools when working on or near batteries or electrical connections.
• Do not produce sparks or flames or smoke near the battery.
To Next Page
Loading...
Need help?
General
