441 4001055250 E 10.21 USA / GB
Turntable
Starter battery inspection
MP0023
Turntable
Starter b attery insp ection
1 - Concerned machines
• HA20 LE - HA20 LE PRO - HA61 LE - HA61 LE PRO
• HA16 RTJ - HA16 RTJ O - HA16 RTJ PRO - HA46 RTJ O - HA46 RTJ PRO
• HA20 RTJ - HA20 RTJ O - HA20 RTJ PRO - HA61 RTJ O - HA61 RTJ PRO
• HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
• HA32 RTJ PRO - HA100 RTJ PRO - HA41 RTJ PRO - HA130 RTJ PRO
• HT21RT O - HT21RT O SW - HT61RT O HT21RT PRO - HT21RT PRO SW - HT61RT PRO HT23RTJ O - HT23RTJ
O SW - HT67RTJ O - HT23RTJ PRO - HT23RTJ PRO SW - HT67RTJ PRO
• HT26 RT O - HT26 RT O SW - HT28 RTJ O - HT28 RTJ O SW - HT28 RTJ PRO - HT28 RTJ PRO SW -
HT80 RT O - HT85 RTJ O - HT85 RTJ PRO
• HT43 RTJ PRO - HT132 RTJ PRO
2 - Warning
3 - Risk prevention
Means of protection to be used when implementing the range
• Only an authorised and qualified technician is permitted to work on the machines HAULOTTE®.
• The use of this form implies that its user has been trained on this type of equipment.
• It is important that the person working on the machine is familiar with all of the safety information contained
in the user manual.
• Generally speaking, the user must comply with regulatory obligations in force, particularly those relating
specifically to working alone, co-activity and manual load handling...
• The user must have all the permits/authorizations required to work (fire permit, etc.) and comply with the
specific safety instructions at the intervention site.
• Only risks linked specifically to activities relating to the disassembly and assembly of the
machine HAULOTTE® are described in this sheet.
• Do not wear any metal jewellery (rings, watches, chains, etc.) when working on the batteries.
• ONLY use insulated tools when working on or near batteries or electrical connections.
• Do not produce sparks or flames or smoke near the battery.
Appropriate workwear Gloves
Safety shoes
To Next Page
Loading...
Need help?
General
