Hawking Wireless-G Router User Manual

IP Filtering
Enable IP Filtering Check to enable the IP filtering function.
Local IP Address Enter the client IP address.
Protocol Select the protocol (TCP, UDP or Both) used to the remote
system or service.
Description You may key in a description for the local IP address
Current Filter
Table
Shows the current filter information.
Save
After completing the settings on this page, click Save to save
the settings.
Reset
Click Reset to restore to default values.

Hawking Wireless-G Router Specifications

General

Brand	Hawking
Model	Wireless-G Router
Category	Network Router
Language	English