Hayter R53A - Checking Engine Oil Level; Adjusting the Cutting Height

CheckingtheEngineOilLevel
ServiceInterval:Beforeeachuseordaily
1.Removethedipstick,wipeitclean,andfullyinstall
thedipstick(Figure17).
Figure17
2.Removethedipstickandchecktheoillevel
(Figure17).IftheoillevelisbelowtheAddmark
onthedipstick,slowlypouroilintotheoillltube
toraisetheoilleveltotheFullmarkonthedipstick.
Donotoverll.(Max.ll:0.6l,type:SAE30
detergentoil)
3.Installthedipsticksecurely.
AdjustingtheCuttingHeight
Adjustingthecuttingheightmaybringyouinto
contactwiththemovingcutterblade,causing
seriousinjury.
•Stoptheengineandwaitforallmovingparts
tostop.
•Donotputyourngersunderthehousing
whenadjustingthecuttingheight.
Iftheenginehasbeenrunning,theexhaust
guardwillbehotandcanseverelyburnyou.
Keepawayfromthehotexhaustguard.
Adjustthecuttingheightasdesired.Setallfourwheels
tothesameheight.
Note:Toraisethemower,moveall4cuttingheight
leversforward;tolowerthemower,movethemall
rearward.
Figure18
AdjustingtheUpperHandle
Height
Youmayraiseorlowertheupperhandletoaposition
comfortableforyou.
Note:Youcannotraisetheupperhandlehigherthan
theangleofthelowerhandle.
1.Loosentheupperhandleknob(Figure19).
Figure19
2.Movetheupperhandletothedesiredposition
(Figure20).
12