What should I do if my Hayward Heat Pump shows an outside temperature sensor fault?
To address an 'Outside temperature sensor fault' on your Hayward Heat Pump, verify the CN12/PH connectors on the board and the extension connector. If the issue continues, replace the sensor.
How can I fix a de-icing sensor fault on my Hayward Heat Pump?
To resolve a 'De-icing sensor fault' on your Hayward Heat Pump, verify the CN8/OPT connectors on the board and the extension connector. If the problem persists, consider replacing the sensor.
How do I troubleshoot a compressor aspiration sensor defect on a Hayward Heat Pump?
To address a 'Compressor aspiration sensor defect' on your Hayward Heat Pump, verify the CN7/OAT connectors on the board and the extension connector. If the issue continues, replace the sensor.
What steps should I take if my Hayward Heat Pump displays a compressor discharge sensor fault?
To troubleshoot a 'Compressor discharge sensor fault' on your Hayward Heat Pump, verify the CN9/OHT connectors on the board and the extension connector. If the issue persists, replace the sensor.
General| Model | ECLI15MA |
|---|---|
| Type | Inverter |
| Output Current | 15A |
| Enclosure Rating | IP65 |
| Input Frequency | 60 Hz |
| Protection Features | Overvoltage, Overcurrent, Short Circuit |
To Next Page
