14
4. USER INTERFACE (continued)
4.5 Setting and visualisation of the set point
(wished water temperature)
If the button is not visible on the screen, press briefly.
(While operating or stopped, simply press the button
to view the set point)
In Mode “OFF” or Mode “ON”
Press the button
to display the set point, then press or to set the
set point you wish.
The setting is made with a precision of 0.5 °C.
It is recommended to never exceed 30°C to avoid alteration of the liners.
4.6 Locking and unlocking the touch screen
Press the button
for 5 s until it beeps and this symbol appears .
To unlock, press
for 5 s until it beeps and this symbol disappears .
To Next Page
Loading...
Need help?
General