Hayward Navigator V-Flex User Manual

4
CARTON CONTENTS
Connector/Leader Hoses
Navigator V-Flex/ PoolVac V-Flex:
x11 Connectors
x1 Leader
Accessory Kit
Navigator or PoolVac
®
x1
Connector
Leader
Regulator
Valve
Cone
Adapter
Flow
Gauge
Skimmer
Elbow
Correct shoe selection for operation
- Your cleaner comes fitted with shoes to suit a concrete pool.
Replacement 4 pack AXV414P
- Also included is a 4 pack of cork shoes to be used in a fibreglass
or vinyl lined pool. Follow the instructions on page 17 for changeover.
Replacement 4 pack AXV413P
-For a tiled pool surface a 4 pack of ceramic shoes will need to be
ordered seperately.
Part number: AXV014CP
5
PREPARING THE POOL
Please complete the following steps
to prepare your pool for installation:
DEBRIS
Remove any large objects and
excessive debris from the pool.
WATER LEVEL
Confirm that water level is at the
recommended level.
WATER CHEMISTRY
Make sure water is properly
balanced and that the pool is free
from algae.
FILTER
Clean or backwash the filter.
Clean the hair and lint prior to
installing the Cleaner.
pH: 7.2 - 7.8
Chlorine: 1.0-3.0 P.P.M
Total Alkalinity: 80 - 120 P.P.M

Hayward Navigator V-Flex Specifications

General

Brand	Hayward
Model	Navigator V-Flex
Category	Swimming Pool Vacuum
Language	English