Hayward Pro Logic User Manual

Automation and Chlorination
Operation Manual
for models
PL-PS-4 PL-PS-8-V
PL-PS-8 PL-PS-16-V
PL-PS-16
Quarterly Monthly Weekly
Free Chlorine 1.0 - 3.0 ppm
pH 7.2 - 7.8
Raise desired output % to
increase, lower desired output %
to decrease -OR- increase or
decrease pump filtration time.
Too low - add soda ash.
Too high - add muriatic acid
Alkalinity 80 - 120 ppm
Salt 2700 - 3400 ppm Add salt as required to increase.
Add baking soda to increase.
Stabilizer 60 - 80 ppm Add cyanuric acid to increase.
Calcium 200 - 400 ppm Add calcium to increase.
Electrolytic Cell inspect & clean Refer to section in manual.
TEST IDEAL RANGE ADJUSTMENT REQUIRED
Drain and add water to decrease.
Add acid as required to decrease.
Pro Logic
092331D RevF
Copyright © 2010 Hayward
www.haywardnet.com
620 Division St.
Elizabeth, NJ 07207

Hayward Pro Logic Specifications

General

Type	Automation Controller
Expandability	Yes
Display	LCD
Housing Material	Plastic
Connectivity	Wired and Wireless Options
Voltage	120V/240V
Beam Angle	N/A (Controller, not a light)
Installation Type	Wall-mounted
Control Compatibility	Hayward Equipment
Salt Chlorination	Optional (with Salt Cell)