Hayward Super Pump SP2670010X15 User Manual

IS26700T Rev-A
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 1
Super Pump
®
700 Series
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or
property damage and if ignored presents a potential hazard. It can also make consumers aware of
actions that are unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
Product Specific Warnings………2
Introduction……….………………..…4
Installation……….……………..….….7
Shaft Seal Replacement..………..8
Replacement Parts………….……..10
Troubleshooting………….…..…….11
Warranty…………………………………13
Registration ……………………..……15

Hayward Super Pump SP2670010X15 Specifications

General

Model	SP2670010X15
Horsepower	1.5 HP
Voltage	115/230V
Phase	Single
Motor Type	TEFC (Totally Enclosed Fan Cooled)
Warranty	1 Year
Type	Above-Ground Pool Pump
Port Size	1.5 inches
Inlet/Outlet Size	1.5 inches

Summary

Important Safety Instructions

Safety Alert Symbol and Definitions

Explains the safety-alert symbol, WARNING, CAUTION, and NOTICE labels for hazard identification.

Introduction and Product Overview

Product Benefits and Specifications

Highlights key features, benefits, and technical specifications of the Super Pump® 700 Series.

Installation Guide

Pump Location and Mounting

Guidance on selecting an optimal location and securely mounting the pump.

Plumbing and Electrical Connections

Details on pipe sizing, fittings, plumbing connections, and electrical safety.

Wiring and Grounding

Voltage Selection and Wiring

Explains voltage options and connection methods for the pump wiring.

Electrical Grounding and Bonding

Details procedures for proper electrical grounding and bonding for safety.

Operation and Maintenance

Pump Start-Up and Priming

Step-by-step guide for initial pump operation and priming.

Routine Maintenance and Winterization

Covers cleaning, lubrication, and procedures for storing or winterizing the pump.

Shaft Seal Replacement

Disassembly and Seal Removal

Instructions for disassembling the pump to remove the shaft seal.

Seal and Component Reassembly

Steps for installing new seals and reassembling the pump components.

Replacement Parts

Parts Diagram and Identification

Visual diagram and list of all replaceable pump components and their part numbers.

Troubleshooting

Motor and Priming Issues

Diagnosing and resolving problems with the motor and pump priming.

Flow and Noise Problems

Identifying and fixing causes of reduced water flow, leaks, and pump noise.

Warranty and Registration

Limited Warranty Information

Details of the limited warranty coverage, exclusions, and service.

Product Registration Process

Instructions and forms for registering the product warranty online or by mail.