To Next PageTo Next PageWhat to check if Drive is overloaded in Hayward Water Pump system?
If the drive is overloaded in your Hayward Water Pump system, check the impeller, diffuser, shaft seal, and motor for any issues. Verify the motor connections to the drive.
What to check if Pump has stalled in Hayward TriStar VS 950 system?
If your Hayward Water Pump has stalled, verify the motor connections to the drive.
General| Model | TriStar VS 950 |
|---|---|
| Pump Type | Variable Speed |
| Horsepower | 2.7 HP |
| Voltage | 230V |
| Energy Efficiency | Energy Star Certified |
| Motor Frame | NEMA 56J |
| Control | Digital |
| Port Size | 2" |
| Wet End Material | Thermoplastic |
Explains the touchscreen interface and remote control capabilities.
Describes the screen displayed after user inactivity.
Details the 4 functions accessible via the power button.
Explains standard and timed service modes for maintenance.
Quick way to turn off most equipment with a single touch.
Customizable screen for quick access to Favorites.
How to select and navigate between pool and spa.
Accessing and controlling features for a selected body of water.
Buttons related to initial configuration and equipment settings.
Buttons for universal control of equipment and backyard features.
Overview of commonly used buttons for intuitive navigation.
Explains common buttons like Save, Cancel, Advance, Back, Add, Delete, On/Off.
Details manual control, speed setting, scheduling, and diagnostics.
Process to add new schedule items for the pump.
How to set start and end times for pump operation.
Configuring how often the schedule should run.
Selecting pump speed for scheduled operation.
Modifying times, speed, and frequency of a schedule.
Disabling a schedule temporarily via the On/Off switch.
Removing unnecessary schedules from the system.
Setting a timer for equipment operation.
Enabling/disabling, setting temperature, and scheduling the heater.
Adjusting setpoint, saving changes, and enabling/disabling the heater.
Managing priority between solar and conventional heaters.
Enabling/disabling solar or heat pump sources.
Introduction to controlling ColorLogic lighting effects.
Shows how to select shows, colors, synchronize, and set schedules.
Managing other types of lights like deck lights.
Controls for cleaners, including scheduling and pump speed.
Managing water features like fountains.
Operating and scheduling various pool accessories.
Accessing and managing schedules for equipment.
Managing spillover functions, including scheduling.
Temporarily overriding freeze protection for the pump.
Accessing and controlling equipment via Favorites.
Understanding and viewing system alarms.
Adjusting screen contrast for daylight viewing.
Quick access to specific equipment control screens.
Navigating to and modifying specific equipment settings.
Understanding the layout and access to Favorites.
Step-by-step guide to creating new Favorites.
Rearranging the order of Favorites on the Home Screen.
Removing unwanted Favorites from the system.
Integrating Favorites for quick access in Simple Mode.
Removing Favorites from the Simple Mode display.
Saving and executing custom equipment state combinations.
Selecting icons, naming, and adding themes to Favorites.
Procedures for initiating a saved Theme.
Procedures for ending an active Theme.
Accessing system configuration settings.
Adding, removing, and configuring pool equipment.
Viewing MSP ID, HUA, and component versions.
Saving and restoring system settings and schedules.
Adjusting hour format, temp units, speed display, brightness.
Viewing IP address and managing network connection.
Setting the current date/time and selecting system language.
Options for clearing or viewing system operational logs.
Checking for and comparing current firmware versions.
Step-by-step guide for updating VS Omni firmware.
Process for adding new language options via USB.
Overview of Simple Mode as an alternative to Standard Mode.
Understanding the display and status indicators in Simple Mode.
Procedure to activate Simple Mode using the MSP ID.
Steps to leave Simple Mode and return to Standard Mode.
Steps to register and log in for remote web access.
Linking the VS Omni unit to the user account.
Details the 4-year limited warranty for the TriStar VS 950 Omni.
Details the 3-year limited warranty for other VS Omni models.
