HBM WTX120 - English; Table of Contents

2 A4500-1.1 HBM: public WTX120
English
1 Safety instructions 6......................................
2 Markings used on the device 12.............................
3 Markings used 13..........................................
3.1 The markings used in this document 13........................
3.2 Symbols on the device 14....................................
4 System description 15......................................
5 Installation 17.............................................
5.1 Overview of connections 17..................................
5.2 Installing the device 19.......................................
5.3 Connecting the supply voltage 20.............................
5.4 Connection of analog strain gage sensors 22...................
5.4.1 Connecting cables for analog load receptors 24.................
5.5 Connection of digital inputs/outputs (DI/DO) 25..................
5.5.1 Connection of standard digital outputs 25.......................
5.5.2 Connection of digital inputs/outputs 26.........................
5.6 Connection of analog output (15-bit) 28........................
5.7 Connection of serial ports 29.................................
5.8 Connection of the PROFINET device variant 30.................
5.8.1 Status LEDs 31.............................................
5.8.2 Configuration of PROFINET variants 32........................
5.9 Connection of the Profibus DP device variant 33................
5.9.1 Configuration of Profibus DP 34...............................
5.10 Connection of the Ethernet/IP device variant 34.................
5.10.1 Status LEDs 35.............................................
5.10.2 Configuration of EtherNet/IP variants 36........................
5.11 Ethernet ports 36...........................................
5.12 USB port 37................................................
5.13 Connection of an external display 38...........................