headway EDB-2 - Detailed Electrical Specifications; Channel 2 Input and Output Specs; Aux In;iPod In Specification; EQ and Notch Filter Specifications


25
11.2.2 CH. 2 INPUT
Input Impedance to Jack via 3 Way Switch: +Hi = >20 Meg Ohms
Hi = 5 Meg Ohms Active/Low Impedance = 1 Meg Ohms
Post EQ/Routes to MASTER Vol.
Input Impedance to XLR: 2kOhms Balanced.
Gain Control to Jack: Continuously variable 0 - +32dB. Dual gang pot.
Stereo Jack IN Offers: Mono Jack Plug In to Ch. 2 alternatively
Stereo Jack Plug routes Tip to Ch. 2 & Ring to Ch.1
Gain Control to XLR: Continuously variable 0- +50dB
11.2.3 AUX IN/iPod IN (Mini-Jack Socket 3.5mm Diam).
Input Impedance = >1 MegOhm
11.2.4 BAXENDALL INTERACTIVE 5 BAND EQ SECTION
Bass +/- 12dB Shelf @ 120 Hz. Or: +/- 16 dB @ 45 Hz
Low Mid: +/- 13dB Shelf @ 590Hz
Hi Mid: +/- 12dB Shelf @ 900Hz
Pres: +/- 7dB Shelf @ 2.8kHz
Treble: +/- 13dB Shelf @ 10.5 kHz
11.2.5 NOTCH FILTER
Q Width: ACW = SHARP/CW = BROAD (5.0 – 0.5)
Depth: 12dB
Frequency: 50 Hz-6 kHz
11.2.6 RANGE SWITCH (High Pass Filter)
Slope Profile of LO frequency roll off: 12 dB per Octave.