Heat & Glo SL-7-IFT User Manual

1
Heat & Glo • SL-5/5LP-IFT, SL-7/7LP-IFT, SL-9/9LP-IFT Owner’s Manual • 2632-981 Rev. D • 1/21
Owner’s Manual
Operation and Maintenance
CAUTION! Risk of Fire! DO NOT store instruction manuals inside replace cavity.
High temperatures could cause a re.
INSTALLER: Leave this manual with the appliance, not inside the appliance.
CONSUMER: Retain this manual for future reference. Do not store inside the appliance.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT discard this manual!
This appliance may be installed as an OEM
installation in manufactured home (USA
only) or mobile home and must be installed
in accordance with the manufacturer’s
instructions and the Manufactured Home
Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States, or the
Standard for Installation in Mobile Homes,
CAN/CSA Z240 MH Series, in Canada.
This appliance is only for use with the type(s)
of gas indicated on the rating plate. This
appliance is not convertible for use with other
gases, unless a certied kit is used.
DANGER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and must be installed for
the protection of children and other at-risk
individuals.
• DO NOT store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor’s phone. Follow the gas sup-
plier’s instructions.
- If you cannot reach your gas supplier, call
the re department.
• Installation and service must be performed
by a qualied installer, service agency, or the
gas supplier.
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
Decorative barrier front must be ordered separately at
time of appliance purchase.
Models:
SL-5-IFT
SL-5LP-IFT
SL-7-IFT
SL-7LP-IFT
SL-9-IFT
SL-9LP-IFT

Heat & Glo SL-7-IFT Specifications

General

Brand	Heat & Glo
Model	SL-7-IFT
Category	Indoor Fireplace
Language	English

Summary

Welcome

Congratulations

Congratulates the user on selecting the Heat & Glo gas fireplace and highlights its benefits.

Limited Lifetime Warranty

Details the warranty coverage, period, conditions, exclusions, and limitations for the appliance and its parts.

Product Specific Information

Appliance Certification

Outlines the standards and laboratories that certified the appliance for safety and use.

Glass Specifications

Describes the tempered glass used, its safety certifications, and options for marked glass.

BTU Specifications

Lists maximum and minimum input BTU/h and orifice sizes for different models (NG and Propane).

Important Safety and Operating Information

Appliance Safety

Covers crucial safety warnings, child supervision, high temperature hazards, and fire prevention.

General Operating Parts

Illustrates and references the main operating parts of the appliance for user familiarity.

Fuel Specifications

Advises on ensuring the appliance is set up for the correct gas type (NG or Propane) and conversion procedures.

Wall and Mantel Temperatures

Specifies allowable temperature limits for combustible surfaces around the fireplace per ANSI/CSA standards.

Good Faith Wall Surface/TV Guidelines

Provides recommended clearances for TV installations above the appliance to prevent overheating.

Before Lighting Appliance

Lists essential checks recommended by a qualified service technician before the first operation.

Lighting Instructions (IPI)

Provides step-by-step instructions for safely lighting the intermittent pilot ignition (IPI) fireplace.

Appliance Break-In

Explains the initial curing process to remove manufacturing odors and ensure proper operation.

Heat Management

Describes optional heat management systems (Heat-Zone, HEAT-OUT-GAS) for redirecting heat.

Operation During A Power Outage - IntelliFire Touch®

Details how to operate the fireplace using the battery backup system during a power outage.

Detailed Component Operating Instructions - IntelliFire Touch

Explains the operation of the IntelliFire Touch (IFT) Electronic Control Module (ECM) and its selector switch.

Maintenance and Service

Maintenance: Frequency and Tasks

Outlines a schedule for maintenance tasks and specifies whether they are for the homeowner or technician.

Maintenance Tasks - Homeowner

Lists specific maintenance tasks that homeowners can perform, such as glass cleaning and remote control checks.

Maintenance Tasks - Qualified Service Technician

Details maintenance tasks that must be performed by a qualified service technician for safety and proper function.

Frequently Asked Questions and Troubleshooting

Frequently Asked Questions - Appliance

Addresses common issues like condensation, blue flames, odors, and metallic noises experienced by users.

Frequently Asked Questions - IntelliFire Touch Controls (Optional IFT-RC400)

Solves common problems related to the IntelliFire Touch remote control, display, and communication errors.

Troubleshooting

Provides detailed guidance on diagnosing and correcting specific error codes and operational issues with the IFT system.

Reference Materials

Accessories

Lists approved accessories and emphasizes using only manufacturer-approved optional items.

Service Parts.

Provides part numbers and diagrams for ordering replacement components for various models.

Contact Information

Offers contact details for Hearth & Home Technologies and advises contacting dealers for questions.