EasyManua.ls Logo

Heat & Glo SL-7 User Manual

Heat & Glo SL-7
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Heat & Glo • SL-5, SL-7, SL-9 Owner’s Manual • 2392-981 Rev. J • 10/19
Models:
Owners Manual
Care and Operation
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions regarding installation, operation or service.
NOTICE: DO NOT discard this manual!
This appliance may be installed as an OEM
installation in manufactured home (USA
only) or mobile home and must be installed
in accordance with the manufacturer’s
instructions and the Manufactured Home
Construction and Safety Standard, Title 24
CFR, Part 3280 in the United States, or the
Standard for Installation in Mobile Homes,
CAN/CSA Z240 MH Series, in Canada.
This appliance is only for use with the type(s)
of gas indicated on the rating plate. This
appliance is not convertible for use with other
gases, unless a certied kit is used.
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas tter.
See appliance installation manual for additional
Commonwealth of Massachusetts requirements.
DANGER
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.
DO NOT store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
What to do if you smell gas
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch. DO
NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor’s phone. Follow the gas sup-
plier’s instructions.
- If you cannot reach your gas supplier, call
the re department.
Installation and service must be performed
by a qualied installer, service agency, or the
gas supplier.
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
SL-5
SL-5LP
SL-7
SL-7LP
SL-9
Pour demander un exemplaire en français de ce Manuel
du propriétaire, visitez www.heatnglo.com/translations.

Other manuals for Heat & Glo SL-7

Question and Answer IconNeed help?

Do you have a question about the Heat & Glo SL-7 and is the answer not in the manual?

Heat & Glo SL-7 Specifications

General IconGeneral
BrandHeat & Glo
ModelSL-7
CategoryIndoor Fireplace
LanguageEnglish

Summary

Welcome

Congratulations

Congratulates the owner on selecting a Heat & Glo gas fireplace.

Local Dealer Information

Section to fill in dealer and appliance information for future reference.

Listing Label Information/Location

Details the location of the model information on the fireplace rating plate.

Limited Lifetime Warranty

Product Specific Information

Appliance Certification

Details the certification standards and laboratories for the appliance models.

Glass Specifications

Information regarding the tempered glass used in the appliance and its safety certifications.

BTU Specifications

Provides a table of maximum and minimum BTU input specifications for different models.

Important Safety and Operating Information

Appliance Safety

Provides critical safety warnings and precautions for operating the fireplace.

Clear Space Requirements

Details the necessary clearances around the fireplace for safe operation.

General Operating Parts

Identifies and references the main operating components of the appliance.

Fuel Specifications

Information on compatible fuel types (natural gas or propane) and conversion requirements.

Good Faith Wall Surface/TV Guidelines

Provides recommended clearances for wall surfaces and TV installations above the fireplace.

Before Lighting Appliance

Checks and procedures recommended before the initial lighting of the fireplace.

Lighting Instructions (IPI)

Step-by-step guide for lighting the appliance using the Intermittent Pilot Ignition system.

Appliance Break-In

Procedure for the initial break-in of the fireplace to cure materials.

Heat Management

Explanation of how to adjust heat output and fan speed on the appliance.

Operation During A Power Outage (IPI)

Instructions on how to operate the fireplace using battery backup during a power outage.

IntelliFire Ignition System Details

Detailed operating instructions for the IntelliFire ignition system and optional fan kit.

Maintenance and Service

Maintenance Frequency and Tasks

Overview of maintenance tasks and their recommended frequency for homeowner and technician.

Homeowner Maintenance Tasks

Specific maintenance tasks that can be performed by the homeowner, like glass cleaning.

Qualified Service Technician Maintenance Tasks

Detailed maintenance procedures for qualified technicians, covering ignition, burner, logs, and inspections.

Frequently Asked Questions and Troubleshooting

Frequently Asked Questions

Answers common user questions regarding fireplace operation, condensation, and noises.

Troubleshooting Intellifire Ignition

Guide for diagnosing and correcting issues with the Intellifire ignition system.

Reference Materials

Accessories

Information on approved accessories for the fireplace, including remote controls and optional kits.

Contact Information

Provides Heat & Glo contact details and website for support and dealer location.

Related product manuals