Need help?Do you have a question about the Heat Controller A-VFH36QA-1 and is the answer not in the manual?
General| Power Supply | 208/230V, 1-phase, 60Hz |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 36000 BTU/h |
| HSPF | 9.0 |
| Heating Capacity | 36000 BTU/h |
Explains the meaning of warning and caution symbols and lists important safety instructions.
Details the meaning of characters in outdoor and indoor unit model numbers for clarity.
Describes the system's intended use, limitations, and operational modes.
Provides guidance on choosing the optimal location for the outdoor unit, including clearances.
Specific advice for installing the unit on a roof structure, including leveling and anchoring.
Covers installing the outdoor unit on a solid base and securing it properly.
Explains how to route and drain condensate water from the outdoor unit, especially in heat mode.
Details requirements for purchasing, handling, and installing refrigerant lines.
Provides tables and diagrams for maximum line set lengths and elevation differences.
Lists connection sizes for outdoor and indoor units and required subassemblies.
Step-by-step guide for performing leak tests, evacuation, and refrigerant release.
Outlines essential safety measures and warnings before performing electrical work.
Details voltage, phase, circuit breaker requirements, and wire gauge compliance for unit wiring.
Instructions for connecting power and communication cables to the outdoor unit.
Explains system charge importance and calculates additional refrigerant needed based on line length.
Demonstrates how to calculate the required additional refrigerant charge for a specific installation.
Guides the final visual check of the installation and confirmation of all connections.
To Next Page