Need help?Do you have a question about the Heat Controller Energy Knight B/A-HMC09AS and is the answer not in the manual?
General| Model Number | B/A-HMC09AS |
|---|---|
| Category | Heat Pump |
| Cooling Capacity (BTU) | 9000 |
| Cooling Capacity (BTU/h) | 9000 |
| Heating Capacity (BTU/h) | 9000 |
| Voltage (V) | 115 |
| Refrigerant Type | R410A |
| Product Name | Energy Knight |
| HSPF Rating | 8.2 HSPF |
| Indoor Unit Dimensions (HxWxD, in) | 31.5 |
Details operational features and controls of the indoor unit.
Explains the use of different buttons on the remote controller for unit operation.
Lists technical data, dimensions, and features for cooling-only models.
Lists technical data, dimensions, and features for cooling & heating models.
Provides diagrams and measurements for the indoor unit.
Provides diagrams and measurements for the 9K and 12K outdoor units.
Illustrates the refrigerant flow for cooling-only models.
Shows the electrical connections for the indoor unit.
Covers time delay, chaos swing, and cooling operation modes.
Details auto operation logic for cooling, including initial start and button presses.
Explains auto operation for dehumidification and heating models.
Explains LED indicators, buzzer sounds, and troubleshooting codes.
Crucial safety precautions and warnings for installers.
Guidance on choosing the best location and piping specifications.
Details on connecting power supply and low voltage wires.
Step-by-step guide for leak testing and air purging.
Procedures for testing unit performance and pump down.
Instructions for removing the grille and first components of 9K/12K indoor units.
Analyzes temperature differences and operating current for troubleshooting.
Diagnostic steps for no operation, remote control, and drive issues.
Information on PWB assemblies and circuit diagrams.
Visual breakdown and part numbers for the 9K indoor unit.
List of part numbers and quantities for the 9K indoor unit.
To Next Page