Need help?Do you have a question about the Heat Controller B-VFH12MA-1 and is the answer not in the manual?
General| Model Number | B-VFH12MA-1 |
|---|---|
| Category | Heat Pump |
| EER | 11.0 |
| Refrigerant | R410A |
| Outdoor Unit Noise Level | 52 dB(A) |
| Indoor Unit Weight | 9 kg |
| Cooling Capacity | 12000 BTU/h |
| Power Supply | 208/230V, 1 Phase, 60 Hz |
Explains symbols used for potential danger, injury, or property damage.
Lists essential safety rules for installation, operation, and maintenance.
Identifies the various parts of the indoor unit with numbered labels.
Explains the meaning of icons displayed on the wireless remote control.
Describes the operation of ON/OFF, FAN, MODE, and TEMP buttons on the remote.
Details the functions of X-FAN, CLOCK, LIGHT, TURBO, and QUIET buttons.
Explains timer settings and louver swing adjustments for comfort.
Describes the remote's feature to sense room temperature for better comfort.
Details the operation and temperature adjustments for Sleep Modes 1 and 2.
Explains how to program custom temperature and time settings for Sleep Mode 3.
Covers keypad lock functionality and switching between Fahrenheit and Centigrade.
Explains cooling principles, capacity factors, and antifreeze function.
Covers defrosting, anti-cold air function, and residual heat removal.
Step-by-step guide for removing, cleaning, and reinstalling the air filter.
Addresses problems like unit not operating, odors, and common noises.
Covers poor cooling/heating, water leakage, and remote control problems.
Details problems with air output, indicator lights, and error codes.
Provides guidance on choosing the optimal installation location.
Details necessary clearances and support for the indoor unit.
Discusses optimal placement and separation for the outdoor unit.
Illustrates required spacing around the indoor unit for proper airflow.
Step-by-step instructions for attaching the wall bracket to the wall.
Guides on creating openings in the wall for refrigerant and drain lines.
Instructions for properly routing and setting up the condensate drain hose.
Covers routing, connecting, and insulating refrigerant lines.
Explains how to bundle and insulate piping for the unit.
Steps for powering on the unit and performing initial operational checks.
To Next Page