Heath Zenith SECURE HOME SH-4132-MB - User Manual

© 2020 HeathCo LLC 207738-03A
INSTALLATION AND OPERATING
INSTRUCTIONS
SAFETY INFORMATION ......................................2
PREPARATION ...............................................2
HARDWARE CONTENTS ......................................2
LIGHT FIXTURE INSTALLATION ...............................3
WIRING THE LIGHT FIXTURE .................................4
OPTIONAL WIRING ..........................................5
MOUNTING THE LIGHT FIXTURE .............................6
TESTING AND ADJUSTMENTS ................................6
CARE AND MAINTENANCE ...................................8
TROUBLESHOOTING GUIDE ..................................8
SPECIFICATIONS .............................................8
TECHNICAL SERVICE .........................................9
THREE YEAR LIMITED WARRANTY ............................9
Motion Decorative Light
Questions?
Please refer to the troubleshooting guide in this manual
or call our technical service department (English speak-
ing only) at 1-800-858-8501, 8:00 a.m. - 5:00 p.m., CST,
Monday - Friday before returning to your retailer.
Keep this manual for future reference.
ATTACH YOUR RECEIPT HERE
Receipt is required for all warranty requests.
Purchase Date
Item Model
616281 SH-4132-MB
Motion Sensing Decorative
Light

Summary

SAFETY INFORMATION

PREPARATION

HARDWARE CONTENTS

LIGHT FIXTURE INSTALLATION

WIRING THE LIGHT FIXTURE

Recommended Grounding Method

Detailed guide on connecting the ground wire pigtail for safe electrical operation.

OPTIONAL WIRING

Wiring Diagram 1 - Standard Light Control

Connects motion sensor red wire to standard light black wire for basic control.

Wiring Diagram 2 - Primary;Controlled

Links a primary fixture's red wire to a controlled fixture's red and black wires.

Wiring Diagram 3 - Primary;Primary Control

Connects red wires of two fixtures for simultaneous operation, often needing house wiring.

MOUNTING THE LIGHT FIXTURE

TESTING AND ADJUSTMENTS

Initial Setup

Guides through setting TEST mode, performing a walk test, and aiming the sensor.

Final Setup

Adjusts sensitivity, ON-TIME, and caulking for complete setup.

Operating Modes

Motion Sensor (AUTO) Mode

Automatically turns light on with motion and off after set time.

Manual Mode

Keeps light on full bright after dusk for one night; resets to AUTO at dawn.

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

SPECIFICATIONS

TECHNICAL SERVICE

THREE YEAR LIMITED WARRANTY

FCC Compliance and Safety Information

Heath Zenith SECURE HOME SH-4132-MB Specifications