EasyManua.ls Logo

Heath Zenith Secure Home SH-4266-BK - User Manual

Heath Zenith Secure Home SH-4266-BK
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2013 HeathCo LLC 200254-03A
INSTALLATION AND OPERATING
INSTRUCTIONS
SAFETY INFORMATION ......................................2
PREPARATION ...............................................2
HARDWARE CONTENTS ......................................2
LIGHT FIXTURE INSTALLATION ...............................3
WIRING THE LIGHT FIXTURE .................................4
OPTIONAL WIRING ..........................................5
MOUNTING THE LIGHT FIXTURE .............................6
TESTING AND ADJUSTMENTS ................................6
CARE AND MAINTENANCE ...................................7
TROUBLESHOOTING GUIDE ..................................8
SPECIFICATIONS .............................................8
TECHNICAL SERVICE .........................................9
THREE YEAR LIMITED WARRANTY ............................9
Motion Decorative Light
Questions?
Please refer to the troubleshooting guide in this manual
or call our technical service department (English speak-
ing only) at 1-800-858-8501, 8:00 a.m. - 5:00 p.m., CST,
Monday - Friday before returning to your retailer.
Keep this manual for future reference.
ATTACH YOUR RECEIPT HERE
Receipt is required for all warranty requests.
Purchase Date
* BulbSaver - Light comes on dim and gradually increases to
full brightness. When the light turns o it will gradually dim to
half-bright, pause, and then will continue dimming until the
light turns o.
For a description of the DualBrite® technology, see page 7.
Item Model
482286 SH-4266-BK
012043 SH-4266-PB
021746 SH-4266-SA
DualBrite® Motion Sensing
Decorative Light

Table of Contents

Questions and Answers

  • M
    Mrs. Desiree AlvaradoAug 11, 2025
    Why do my Heath Zenith Outdoor Lights stay on continuously?
    • W
      William GuerreroAug 11, 2025
      Your Heath Zenith Outdoor Lights might stay on because the sensor is detecting a heat source such as an air vent, dryer vent, or a heat-reflective surface. Try re-aiming the sensor and reducing the sensitivity. Also, ensure the light control is not in Manual Mode by switching to Auto, and that DualBrite® mode is off by sliding the DualBrite® switch to the OFF position. Additionally, check if the sensitivity is set too high and reduce it if necessary.
  • T
    Tommy MoraAug 17, 2025
    Why do my Heath Zenith Outdoor Lights come on for no apparent reason?
    • S
      sherri01Aug 17, 2025
      Your Heath Zenith Outdoor Light might activate for no obvious reason if the sensor is picking up small animals or automobile traffic. Try re-aiming the sensor and reducing its sensitivity. It's also possible that the sensitivity is set too high, so try reducing it.
  • B
    Brittney FreemanAug 23, 2025
    Why do my Heath Zenith Outdoor Lights come on in daylight?
    • K
      keith43Aug 23, 2025
      If your Heath Zenith Outdoor Lights are activating during the day, it could be because the light control is installed in a relatively dark location; the fixture is operating normally under these conditions. Also, check if the light control is in TEST mode and set the control switch to 1, 5, or 10 minutes.
  • L
    leemartinAug 29, 2025
    How to stop Heath Zenith Outdoor Lights from flashing on and off?
    • E
      ecampbellAug 29, 2025
      If your Heath Zenith Outdoor Lights are flashing on and off, it might be because the light control is in TEST mode and warming up; this flashing is normal under these conditions. Alternatively, heat being reflected from other objects might be affecting the sensor. Try re-aiming the sensor and reducing its sensitivity.
  • F
    fchaseSep 3, 2025
    What to do if my Heath Zenith Outdoor Lights will not come on?
    • R
      Riley MartinSep 3, 2025
      If your Heath Zenith Outdoor Lights aren't turning on, first ensure the light switch is on. Check the bulb and replace it if it's burned out or loose. Also, verify that the fuse hasn't blown or the circuit breaker hasn't been turned off. It's possible the daylight turn-off feature is active, so recheck after dark. Make sure the sensor is properly aimed to cover the desired area. If it's a new installation, double-check the circuit wiring.

Heath Zenith Secure Home SH-4266-BK Specifications

General IconGeneral
BrandHeath Zenith
ModelSecure Home SH-4266-BK
CategoryOutdoor Light
LanguageEnglish

Related product manuals