Heathkit IO-4205 - Page 40

1
Page 38
The steps performed in this Pictorial are
in this area of the circuit board .
) R252: 100
kn (Brn-Blk-Yel).
R208: 1800
n (Brn-Gry-Red).
R212: 270
n (Red-Viol-Brn).
16: 1800
n (Brn-Gry-Red).
Solder the leads to the foil and cut
off the excess lead lengths.
fJ R219: 1000 0 (Brn-Blk-Red).
R229: 390
n (Org-Wht-Brn).
R228: 330
n (Org-Org-Brn).
R268: 1000
0 (Brn-Blk-Red).
R277: 2.7
0 (Red-Viol-Gold).
R278: 1000
0 (Brn-Blk-Red).
R227: 1000
0 (Brn-Blk-Red).
Solder the leads to the foil and cut
off the excess lead lengths.
PICTORIAL 2-3
IDENTIFICATION
DRAWING
PART
NUMBER
1000
n (Brn-Blk-Red).
R205: 1800
0 (Brn-Gry-Red).
R210: 15
kn (Brn-Grn-Org).
R209: 330
n (Org-Org-Brn).
R214: 47
0 (Yel-Viol-Blk).
: 1000
0 (Brn-Blk-Red).
Solder the leads to the foil and cut
the excess lead lengths .
R217: 820
0 (Gry-Red-Brn).
R242: 910
kn (Wht-Brn-Yel).
R244: 10
0 (Brn-Blk-Blk).
R237: 220
n (Red-Red-Brn).
R220: 47
kn (Yel-Viol-Org).
(
LJ-Solder the leads to the foil 11nd cut
off the excess lead lengths.