To Next PageTo Next Page
Need help?Do you have a question about the Heatilator GNDC36 and is the answer not in the manual?
General| Brand | Heatilator |
|---|---|
| Model | GNDC36 |
| Category | Indoor Fireplace |
| Language | English |
Appliance certification standards and listing. Compliance with US and Canadian safety standards.
Adherence to local building codes and national fuel gas codes for installation. Conformance with local and national regulations.
Details on tempered glass testing and certification for safety glazing requirements. Glass used meets safety glazing standards.
Recommended locations and space requirements for installing the appliance in various rooms.
Essential clearances to maintain around the appliance for safety and proper operation.
Specifications for framing openings and determining mantel height relative to the appliance.
Instructions for placing and leveling the appliance on a suitable surface.
Clearances and specific rules for rear vent horizontal termination, including elbow limitations.
Clearances and vent length limitations for top vent horizontal installations.
Clearances and vent length guidelines for rear vent vertical termination.
Clearances and vent length guidelines for top vent vertical termination.
Procedures for installing wall shields when venting penetrates a wall.
Guidance on installing heat shields for rear vent configurations.
Instructions for installing firestop spacers in ceiling or floor penetrations.
Guidelines for chase construction and termination of the vent system.
Steps for connecting vent sections to the appliance collars securely.
Methods for connecting, securing, and disconnecting vent pipes and sections.
How altitude affects appliance performance and necessary adjustments.
Proper procedures for connecting the gas supply and checking gas pressure.
Information on fuel types and available conversion kits for propane or natural gas.
Instructions for wiring wall switches and the standing pilot ignition system.
Details on intermittent pilot ignition system wiring and junction box installation.
Step-by-step instructions for installing the electrical junction box.
Definitions of combustible, noncombustible, and high-temperature sealant materials.
Steps for placing decorative elements like logs, rock wool, and lava rock.
Procedures for removing, cleaning, and replacing the glass and screen assembly.
Instructions for correctly placing the control access panel after servicing.
Step-by-step guide for lighting the appliance with intermittent pilot ignition.
Step-by-step guide for lighting the appliance with a standing pilot ignition.
Guidelines for operating and shutting down standing and intermittent pilot ignition systems.
Notes on fuel usage, safety, and necessary conversion kits.
Procedures for cleaning the burner and checking flame patterns for proper operation.
Importance of inspecting venting for obstructions and guidelines for glass cleaning.
Instructions for safely removing and reinstalling the log set.
