Heatmor 200 CSS - Page 89

84
Smoke from
chimney is an
annoyance.
Chimney is not
high enough.
Add Chimney
Extension.
Refer to
“Chimney Extension(s).”
Improper location of
furnace (trees, buildings,
winds, neighbors).
Possibly relocate
furnace. Contact local
dealer.
Contact your
Local Dealer.
Built up creosote is
burning off rebox
surface. Wood pieces
are too small - too much
surface area.
Maintain hot re. Refer to
“Wood.”
Draft blowers have just
turned off.
Smoke will dissipate.
Burning garbage.
DO NOT BURN
GARBAGE.
Contact your
Local Dealer.
Burning wet wood. Burn dryer wood.
Refer to
“Types of Wood.”
Burning what
seems to be a lot
of wood.
Losing heat into the
ground. Poor insulation.
Re-insulate water lines
and maintain a dry
perimeter.
Contact Your
Local Dealer.
Ground water is
extracting heat from the
water lines.
Provide a method for
ground water to drain.
Contact Your
Local Dealer.
Wood is too dry.
Burning too
fast and hard.
Refer to
“Types of Wood.”
Wood is too small of
pieces.
Add larger pieces
of wood.
Refer to
“Wood.”
Top ue is clogged. Clean Top Flue.
Refer to
“Top Rectangular Flue.”
PROBLEM CAUSE SOLUTION PROCEDURE