made for garden
11 / 72
EN
SAFETY INSTRUCTION
i
Improper use of this device may cause serious injuries. Before working with your
device, read all instructions carefully and make yourself familiar with all controls.
In case of doubt, get in touch with your service center. Keep this manual in a safe
place to have necessary information at any time.
USE OF PURPOSE
• The firewood drag saw is designed for cross-cutting firewood within the specified
dimensions (see technical data) in a feed cradle that pivots towards the saw blade.
• Do not saw any materials that contain foreign bodies such as wires, nails, cables or ties.
• Any other use which is not in this manual specifically approved, may cause
machine damage and serious threat to users. Operator or user is responsible
for any injury or damage to the third parties or their property. Producer is not
responsible for damages caused by improper use or incorrect handling.
ENVIRONMENTAL CONDITIONS
• Operating temperature of environment of machine is between 0 ° - 30 ° C
• Use the unit only on a hard, flat, dry, non-slip surface.
• Ensure sufficient space around the machine handling.
• Do not use in rain or bad weather.
• Work only in daylight or good lighting.
• Store in a dry place at a temperature of 0 ° to + 40 ° C out of reach of children.
USERS OF THE PRODUCT:
The product must not be used by:
• Tired people
• People under the influence of alcohol
• People who take drugs or other substances decreasing attention
• Pregnant women
• Persons with poor physical condition
• People who do not read instructions
• Children
i
When using this machine, observe the following safety instructions to exclude
the risk of personal injury or material damage. Please also observe the special
safety instructions in the respective chapters. Where applicable, follow the legal
directives or regulations for the prevention of accidents pertaining to the use of
machine.
GENERAL SAFETY INSTRUCTIONS
• Concentrate on what you do. Use common sense when working. Do not operate the
machine unless you are fully concentrated at your work.
• Work only in daylight or in quality artificial light.
• Keep bystanders (esspecially children and pets) in a safe distance.
• Never dismount the safety equipment.
• All damaged safety equipments of the machine must be replaced or repaired at authorised service.
• Do not overload the machine. Remember that the machine is not designed for
professional use.
To Next Page
Loading...