36 / 42
PL
SK
EN
CS
HU
• In case of long-term machine downtime, we recommend that you dismantle the battery or
at least disconnect the battery and fully recharge it every 2 months.
• Store batteries (and chargers) in a dry, dust-free, dark and temperature-stable environment
at an ambient temperature preferably between +10 °C and +20 °C. Don‘t store or operate
near an open fire. Protect them from frost and temperatures above + 50 °C.
• Don‘t store used batteries together with tools, paper clips, coins, keys, nails, screws or other
small metal objects that may cause contacts to bridle. A short circuit between the battery
contacts may result in burns, fire or battery damage.
TRANSPORT
• Do not lift the wheelchair by the handlebars or the bonnet during loading and handling.
There are bumpers in the rear and front of the wheelchair, which also serve as handles.
• Tie down the machine securely in an upright position while transporting.
• Take care not to drop or strike the machine when transporting.
• Take care not to strike the machine when transporting. Do not place objects on the machine.
ERROR CODES
A diagnostic function is installed in the wheelchair control unit to detect certain failures in
the control system.
If the diagnostics detects a failure, the status indicator light on the instrument panel flashes at
a certain frequency for each failure.
Status indicator flashes
continuously
Indicator light flashing
frequency.
Indicated error/failure
Potentiometer error
Speed limit potentiometer failure
Battery overvoltage
Control unit failure
Brake failure / Push mode on
Control unit failure
Potentiometer or wheel suspension failure
Control unit failure
Engine failure or electromagnetic brake failure
Control unit failure
Control unit failure
SERVICE AND SPARE PARTS
• Have your device serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the device is maintained.
To Next Page
Loading...