© 2021 HEDD Audio GmbH | Heinz Electrodynamic Designs | www.hedd.audio
Speaker Setup
To achieve the best possible sound and unfold the full potential of the HEDD MK2
monitors, the correct speaker placement is very important. Please follow our guide below.
Vertical Setup
Placing the speaker vertically is the best way, as they are designed to be placed like this.
Always place them on a solid surface or a stand.
Horizontal Setup
If you like to place the speaker horizontally in a stereo or surround setup, make sure that
they are aligned symmetrically: The Tweeters both should face either outwards or inwards.
Otherwise, the acoustical image will not be correct.
Height Positioning
Place the speaker in a position so that the tweeter matches the height of your ears when
you are on your listening position. If this is not possible, tilt the speaker so that the tweeter
aims at your ears. Try to avoid that the tweeter is placed too low or too high, as this may
result in a mued or less dened sound.
To Next Page
Loading...
