6
Quickstart
1. Connect your amplifier
Connect with RCA or XLR cables from the V10
to a line input on your amplifier
2. Connect your turntable
Right
GND
MM
MC
Connect RCA cables from the turntable to the V10
Use either the MM or the MC input depending on
your cartridge*
Connect the grounding cable to GND if your
turntable is equipped with this
*The V10 comes configured with a default MM
cartridge setting. For MC cartridges and more
advanced settings please see page 10 and 11
Warning! Never connect MM and MC inputs
simultaneously
Right
GND
MM
MC
XLR RCA
RCA GROUND
To Next Page
Loading...
